Wed Apr 10 2002  15:56:01PM    modified by:  tjn <naughtont@ornl.gov>

  Ok, it's all finished and submitted.  The final CVS rev number
  of the paper was v1.36.  This is what what submitted online
  and the hardcopy (via FedEx).  Things were processed and 
  'misc/accept6-notice.email' was the automated response from the
  SCI'02 website.  

    --tjn   4/10/02  4:00pm

 -------------------------------------------------------------

 A. Pending changes from you guys, this is what will be submitted 
    for the camera-ready copy of this paper.  
	NOTE: If you can help on items D & E this would change too.
 
 B. Note, the review/feedback email is also included in this tarball,
    'misc/feedback-review.email'.

 C. I've added two items based upon the review/feedback.  These are
    marked with changebars and relate to
   	1. Footnote with cheesy definition of 'head node'
	2. New item in Future section to comment on interconnects

    Also, I changed some of the page/style formatting at a futile
	attempt at accordance with the camera-ready specs.
	 Old:
     	< \setlength{\textheight}{8.90in} 
     	< \setlength{\footskip}{0.50in}
	 New:
     	> \setlength{\textheight}{9.10in} 
     	> \setlength{\footskip}{0.30in}
     	> \setlength{\columnsep}{1.4cm}
     	> \setlength{\columnwidth}{8.2cm}


 D. I began to look at changing the formatting to be more like the
    SCI'02 requested pseudo-IEEE format as per 'misc/AuthorsKit-A.pdf'.  
	(See page 2 & 3 of that doc for the camera-ready specs)
	This includes page formatting and some section changes, specifically 
		a. \abstract, 
		b. \section
		c. \subsection
    Basically thier request translate into: 
		(a) should be centered,
		(b) should be centered (slightly diff number format)
		(c) should not have a number

    Since I couldn't get (a) & (b) to format cleanly, I didn't worry
    about using the '*' for (c).  The standard IEEE class changes a
    lot, much of which is not necessary or similar to what SCI wants.

 E. So, if someone more adepts at LaTeX wants to tweak these section
    definitions to format correctly, ROCK!  Otherwise I'm going to
    leave well enough alone, especially since the review/feedback
    didn't comment on this issue.

thanks,
--tjn

   *****************************************************************

The rest of this is what was originally in a LaTeX header notes.

%     + For what it's worth -- to gen the 'ps' or 'pdf' I use:
%             tjn:$ make pdf          OR       make ps
%
%       And then cleanup tmp files with:
%             tjn:$ make clean
%
%       And cleanup tmp AND targets *.[pdf|ps] with:
%             tjn:$ make cleanall