DATA SET 11. INTEGER PARAMETERS FOR TRANSIENT SOURCE and BOUNDARY CONDITIONS

This data set, in free format, contains the following variables:

1. NSEL = No. of source/sink elements.
2. NSPR = No. of source/sink profiles.
3. NSDP = No. of data points in each of the NSPR source/sink profiles.
4. KSAI = Is element-source/sink profile to be input analytically, 0 = no, 1 = yes.
5. NVES = No. of variable boundary element sides.
6. NVNP = No. of variable boundary nodal points.
7. NRPR = No. of rainfall profiles.
8. NRDP = No. of rainfall data points in each of the NRPR rainfall profiles.
9. KRAI = Is rainfall profile to be input analytically, 0 = no, 1 = yes.
10. NDNP = No. of Dirichlet nodal points.
11. NDPR = No. of total Dirichlet-head profiles.
12. NDDP = No. of data points in each total head profiles.
13. KDAI = Is Dirichlet boundary value profile to be input analytically, 0 = no, 1 = yes.
14. NCES = No. of Cauchy boundary element sides.
15. NCNP = No. of Cauchy nodal points.
16. NCPR = No. of Cauchy-flux profiles.
17. NCDP = No. of data points in each of the NCPR Cauchy-flux profiles.
18. KCAI = Is Cauchy flux profile to be input analytically, 0 = no, 1 = yes.
19. NNES = No. of Neumann boundary element sides.
20. NNNP = No. of Neuamnn nodal points.
21. NNPR = No. of Neumann flux profiles.
22. NNDP = No. of data points in each of the NNPR Neumann-flux profiles.
23. KNAI = Is Neumann flux profile to be input analytically, 0 = no, 1 = yes.
24. NWNP = No. of well or point source/sink nodal points.
25. NWPR = No. of well or point source/sink strength profiles.
26. NWDP = No. of data points in each of the NWPR profiles.
27. KWAI = Is well-source/sink profile to be input analytically, 0 = no, 1 = yes.
28. NRRR = No. of river water surface profile.
29. NRRP = No. of data points in each river water surface profile.

Return to MurfMd home page.
Back to data set 10: Initial condition.
On to data set 12: Source and sink.